Skip to content

8 Best Pipe Wrenches for Plumbers, Compared by Size, Weight and Jaw Capacity

Updated November 16, 2026Written and fact-checked by Michael Carter19 min readHow we checked this

Some links on this page are affiliate links. If you buy through one, we may earn a commission at no extra cost to you. See our affiliate disclosure.

Plumber using a red cast iron pipe wrench to tighten a threaded steel fitting under a sink

Quick answer: For most service plumbers, a 14 inch aluminum wrench is the first buy: RIDGID’s Model 814 and Milwaukee’s 14 inch both handle 2 inch pipe in about 2 1/4 to 2 1/2 pounds. Add an 18 inch for larger pipe, and a 10 inch for tight spots. Bob Vila’s top pick, the Milwaukee Cheater Steel, is listed below as a pick without a buy button.

Size sets capacity and leverage, material sets weight and abuse tolerance, and jaw condition sets whether it grips. Below: specs, who should skip each wrench, and where the sources disagree.

The 8 Best Pipe Wrenches at a Glance

Eight wrenches from RIDGID, Milwaukee and IRWIN. Tap a photo or a button to see the current price and listing details.

The 8 pipe wrenches at a glance
ProductBest forPrice categoryNamed byBuy
IRWIN VISE-GRIP Cast Iron Pipe Wrench, 18 InchIRWIN VISE-GRIP Cast Iron Pipe Wrench, 18 InchA low-cost cast iron 18 inch for the truck or the garageBudgetIRWIN specification listingCheck price
RIDGID 31010 Model 10 Heavy-Duty Straight Pipe Wrench, 10 InchRIDGID 31010 Model 10 Heavy-Duty Straight Pipe Wrench, 10 InchA compact cast iron wrench for small fittings and tight workBudgetRIDGID specification tableSee details
RIDGID 31305 Model E-110 Offset Hex Jaw Pipe Wrench, 9 1/2 InchRIDGID 31305 Model E-110 Offset Hex Jaw Pipe Wrench, 9 1/2 InchOffset reach for hex nuts, unions and tight spotsBudgetRIDGID specification tableCompare options
Milwaukee 48-22-7214 14 Inch Aluminum Pipe WrenchMilwaukee 48-22-7214 14 Inch Aluminum Pipe WrenchA light 14 inch with Milwaukee’s overbite jaw at a mid priceBudgetMilwaukee product pageCheck availability
RIDGID 31095 Model 814 Aluminum Straight Pipe Wrench, 14 InchRIDGID 31095 Model 814 Aluminum Straight Pipe Wrench, 14 InchThe everyday 14 inch for most service plumbersMid-rangeRIDGID catalogShop now
RIDGID 31100 Model 818 Aluminum Straight Pipe Wrench, 18 InchRIDGID 31100 Model 818 Aluminum Straight Pipe Wrench, 18 InchA light 18 inch for 2 1/2 inch pipeMid-rangeRIDGID catalogSee current price
RIDGID 31030 Heavy-Duty Straight Pipe Wrench, 24 InchRIDGID 31030 Heavy-Duty Straight Pipe Wrench, 24 InchA 3 inch capacity iron wrench for big threaded workMid-rangeRIDGID specification tableView listing
RIDGID 31105 Model 824 Aluminum Straight Pipe Wrench, 24 InchRIDGID 31105 Model 824 Aluminum Straight Pipe Wrench, 24 InchThree inch capacity at 6 pounds instead of 10PremiumRIDGID catalogCheck sizes

Price categories reflect the listing price when we checked: Budget is under $50, Mid-range is $50 to $100 and Premium is above $100. Prices change often.

Infographic with six steps for choosing and using a pipe wrench safely
How to choose and use a pipe wrench in six steps

Which Pipe Wrench for Which Job (and Who Should Skip Each)

Which pipe wrench for which job
If you needLook atWhat the sources say
One wrench for most service callsRIDGID 814, Milwaukee 14 inchPlumberMag: a 14 inch aluminum wrench is a good first purchase.
Bigger pipe up to 2 1/2 inchesRIDGID 818, IRWIN 18 inch ironPlumberMag: 18 inch is common up to 2 1/2 inch pipe.
Pipe up to 3 inchesRIDGID 31030 iron, RIDGID 824 aluminumBoth rated 3 inches; 10 versus 6 pounds.
Small fittings and tight spacesRIDGID Model 101 1/2 inch capacity at 1.75 pounds.
Hex nuts, unions and drain nutsRIDGID E-110 offset hexThin smooth hex jaws; 1 1/8 to 2 5/8 inch capacity.
The lowest cost for an 18 inchIRWIN 18 inch cast iron2 1/2 inch capacity at about 6.3 pounds.
The lightest overhead wrenchMilwaukee 14 inch, RIDGID 814About 2 1/4 to 2 1/2 pounds.

Who should skip each wrench

Skip it if
ProductSkip it ifBecause
IRWIN 18 inch ironYou work overhead all dayOver 6 pounds
RIDGID Model 10You work on 2 inch pipe1 1/2 inch capacity
RIDGID E-110You need one wrench for threaded pipeSmooth hex jaws
Milwaukee 14 inchYou need 3 inch capacity2 inch capacity
RIDGID 814You want a cheap abuse wrenchHigher price than iron
RIDGID 818You rarely use pipe over 2 inchesCosts more than iron
RIDGID 31030You work overhead or small fittingsAbout 10 pounds
RIDGID 824You rarely need 3 inch capacityHighest price

Best Cast Iron Pipe Wrenches

Heavy-duty iron wrenches for the truck and the shop.

IRWIN VISE-GRIP Cast Iron Pipe Wrench, 18 Inch

Best for: A low-cost cast iron 18 inch for the truck or the garage

IRWIN VISE-GRIP 18 inch blue cast iron pipe wrench

IRWIN VISE-GRIP Cast Iron Pipe Wrench, 18 Inch

Price category: Budget

An 18 inch cast iron wrench with 2 1/2 inch jaw capacity, an I-beam handle and a hammer head.

Check price

Distributor listings for the IRWIN VISE-GRIP 18 inch cast iron wrench give it a 2 1/2 inch maximum pipe capacity, a drop-forged heat-treated jaw, an I-beam handle and a hammer head with a flat surface for tapping (Pelican Sales Supply). Listed weights run from about 6.3 to 6.5 pounds.

Bob Vila places an IRWIN cast iron 18 inch among its picks as well, with a 2 1/2 inch capacity at about 6.3 pounds. Cast iron is heavy, which is the trade for a low price and a solid feel for a wrench that mostly lives in the truck.

Spec sheet:

What this means for you (general advice): A sensible second wrench for larger fittings when you do not want to spend RIDGID money.

Fit and sizing: Cast iron body, hammer head, wide I-beam handle.

Versions to check: IRWIN sells cast iron and cast aluminum 18 inch versions. Look for cast iron in the title.

Watch for: Heavy at over 6 pounds; made in China per distributor listings.

Skip it if: you work overhead all day or want the lightest wrench.

RIDGID 31010 Model 10 Heavy-Duty Straight Pipe Wrench, 10 Inch

Best for: A compact cast iron wrench for small fittings and tight work

RIDGID Model 10 heavy-duty 10 inch red straight pipe wrench

RIDGID 31010 Model 10 Heavy-Duty Straight Pipe Wrench, 10 Inch

Price category: Budget

A 10 inch heavy-duty wrench with 1 1/2 inch capacity, a ductile iron body and replaceable hardened jaws.

See details

RIDGID lists its 10 inch heavy-duty straight wrench at 1 1/2 inch pipe capacity and about 1.75 pounds, built with a ductile iron housing, a full floating forged hook jaw and replaceable twice-hardened jaws.

PlumberMag says to keep about a half inch of gap between the back of the hook jaw and the pipe, which is easier to judge on a small wrench. A pair of 10 inch and 14 inch wrenches covers much residential fitting work.

Spec sheet:

  • Length: 10 inches; pipe capacity 1 1/2 inches (RIDGID).
  • Weight: about 1.75 pounds (RIDGID).
  • Build: ductile iron housing, forged hook jaw, replaceable jaws (RIDGID).

What this means for you (general advice): The wrench you reach for under a sink or in a cramped chase, and the one to buy first if you work small fittings.

Fit and sizing: Compact red cast iron body with an I-beam handle.

Versions to check: RIDGID sells several 10 inch wrenches (heavy-duty, aluminum). Look for Model 10 and 31010 in the title.

Watch for: Small capacity; not for anything over 1 1/2 inch.

Skip it if: you mostly work on 2 inch and larger pipe.

RIDGID 31030 Heavy-Duty Straight Pipe Wrench, 24 Inch

Best for: A 3 inch capacity iron wrench for big threaded work

RIDGID 31030 heavy-duty 24 inch red straight pipe wrench

RIDGID 31030 Heavy-Duty Straight Pipe Wrench, 24 Inch

Price category: Mid-range

A 24 inch heavy-duty wrench with 3 inch capacity, a ductile iron body and about 10 pounds of weight.

View listing

RIDGID lists its heavy-duty 24 inch wrench at 3 inch capacity and about 10 pounds, with a ductile iron housing, a full floating forged hook jaw and replaceable twice-hardened jaws.

PlumberMag notes that ductile iron handles bend before they break, which is a warning sign rather than a sudden failure. At 10 pounds this is a two-handed wrench for shop and mechanical room work.

Spec sheet:

  • Length: 24 inches; pipe capacity 3 inches (RIDGID).
  • Weight: about 10 pounds (RIDGID).
  • Build: ductile iron housing, forged hook jaw, replaceable jaws (RIDGID).

What this means for you (general advice): The big-pipe wrench for mechanical rooms, boilers and supply lines.

Fit and sizing: Heavy red ductile iron body.

Versions to check: RIDGID sells 24 inch iron and aluminum versions. Look for 31030 in the title.

Watch for: Heavy at about 10 pounds.

Skip it if: you work overhead or on small fittings.

Best Aluminum Pipe Wrenches

Lighter wrenches for overhead work and long days.

Milwaukee 48-22-7214 14 Inch Aluminum Pipe Wrench

Best for: A light 14 inch with Milwaukee’s overbite jaw at a mid price

Milwaukee 14 inch aluminum pipe wrench with overbite jaw

Milwaukee 48-22-7214 14 Inch Aluminum Pipe Wrench

Price category: Budget

A 14 inch aluminum wrench with 2 inch capacity, an overbite jaw and dual coil springs.

Check availability

Milwaukee lists the 48-22-7214 as a 14 inch aluminum wrench with a 2 inch jaw capacity and an overbite jaw that gives the largest gripping surface. Distributor pages add through-hardened jaws, dual coil springs and a tether-ready handle loop.

Distributor weights range from about 2.27 to 2.79 pounds, so check the label on the one you receive. Milwaukee also sells a 14L version with a longer POWERLENGTH handle at about 2.85 pounds (Milwaukee).

Spec sheet:

  • Length: 14 inches; jaw capacity 2 inches (Milwaukee).
  • Weight: about 2.3 pounds, with distributor figures from 2.27 to 2.79 (Milwaukee).
  • Features: overbite jaw, dual coil springs, tether-ready handle loop (Milwaukee).

What this means for you (general advice): A light wrench for overhead work and long days that still has a 2 inch bite.

Fit and sizing: Aluminum I-beam handle with a hanging loop.

Versions to check: Milwaukee sells 14 inch standard, 14L and self-adjusting versions. Look for 48-22-7214 in the title.

Watch for: Aluminum handles flex less than iron under heavy cheater-pipe loads; distributor weights vary.

Skip it if: you regularly need 3 inch capacity.

RIDGID 31095 Model 814 Aluminum Straight Pipe Wrench, 14 Inch

Best for: the everyday 14 inch for most service plumbers

RIDGID Model 814 14 inch aluminum straight pipe wrench

RIDGID 31095 Model 814 Aluminum Straight Pipe Wrench, 14 Inch

Price category: Mid-range

A 14 inch aluminum wrench with 2 inch capacity and RIDGID’s replaceable hook jaw, heel jaw and spring.

Shop now

RIDGID’s catalog lists the Model 814 at 14 inches with a 2 inch pipe capacity and about 2 1/2 pounds. A RIDGID regional page lists it at 2 1/4 pounds, so the weight depends on which sheet you read (RIDGID).

RIDGID says its aluminum wrenches offer the same durability and ease of use as its heavy-duty line at roughly 40 percent less weight, and retailer pages note that the hook jaw, heel jaw and spring are made for easy replacement. PlumberMag calls a 14 inch aluminum straight wrench a good first purchase.

Spec sheet:

  • Length: 14 inches; pipe capacity 2 inches (RIDGID’s catalog).
  • Weight: about 2 1/4 to 2 1/2 pounds depending on the sheet (RIDGID’s catalog).
  • Build: cast aluminum with replaceable hook jaw, heel jaw and spring.

What this means for you (general advice): The most useful single size for service work: light enough for overhead, big enough for 2 inch pipe.

Fit and sizing: Aluminum handle in RIDGID’s I-beam pattern.

Versions to check: RIDGID sells 14 inch aluminum and 14 inch heavy-duty wrenches. Look for Model 814 and 31095.

Watch for: More expensive than iron wrenches of the same size.

Skip it if: you want a cheap wrench to abuse with a cheater pipe.

RIDGID 31100 Model 818 Aluminum Straight Pipe Wrench, 18 Inch

Best for: A light 18 inch for 2 1/2 inch pipe

RIDGID Model 818 18 inch aluminum straight pipe wrench

RIDGID 31100 Model 818 Aluminum Straight Pipe Wrench, 18 Inch

Price category: Mid-range

An 18 inch aluminum wrench with 2 1/2 inch capacity at about 3 3/4 pounds.

See current price

RIDGID’s catalog lists the Model 818 at 18 inches with a 2 1/2 inch capacity and about 3 3/4 pounds, which is nearly two pounds lighter than the heavy-duty 18 inch iron model at 5.5 pounds (RIDGID).

PlumberMag says an 18 inch is commonly used up to 2 1/2 inch pipe. This is the size to pick if you want the leverage for larger pipe without lugging iron.

Spec sheet:

What this means for you (general advice): The wrench for a van that already has a 14 inch and needs something bigger.

Fit and sizing: Aluminum I-beam handle with the same jaw family as the 14 inch.

Versions to check: RIDGID sells 18 inch aluminum and iron wrenches. Look for Model 818 and 31100.

Watch for: Costs more than IRWIN iron at the same size.

Skip it if: you rarely work on pipe over 2 inches.

RIDGID 31105 Model 824 Aluminum Straight Pipe Wrench, 24 Inch

Best for: three inch capacity at 6 pounds instead of 10

RIDGID Model 824 24 inch aluminum straight pipe wrench

RIDGID 31105 Model 824 Aluminum Straight Pipe Wrench, 24 Inch

Price category: Premium

A 24 inch aluminum wrench with 3 inch capacity at about 6 pounds, roughly four pounds lighter than the iron model.

Check sizes

RIDGID’s catalog lists the Model 824 at 24 inches with a 3 inch capacity and about 6 pounds, compared with about 10 pounds for the heavy-duty 24 inch iron wrench (RIDGID).

The saving is real if you carry a long wrench all day. The trade is price: it is the most expensive wrench in this list, and aluminum handles are less forgiving of abuse than iron.

Spec sheet:

What this means for you (general advice): For plumbers and pipefitters who work big pipe often and feel every pound.

Fit and sizing: Long aluminum I-beam handle.

Versions to check: RIDGID sells 24 inch aluminum and iron wrenches. Look for Model 824 and 31105.

Watch for: Highest price in this list.

Skip it if: you rarely need 3 inch capacity.

Best Offset Wrench for Tight Spaces

Offset reach for nuts, unions and drain fittings.

RIDGID 31305 Model E-110 Offset Hex Jaw Pipe Wrench, 9 1/2 Inch

Best for: offset reach for hex nuts, unions and tight spots

RIDGID E-110 offset hex jaw pipe wrench in red

RIDGID 31305 Model E-110 Offset Hex Jaw Pipe Wrench, 9 1/2 Inch

Price category: Budget

A 9 1/2 inch offset hex wrench with thin smooth jaws and a 1 1/8 to 2 5/8 inch capacity.

Compare options

RIDGID lists the E-110 as a 9 1/2 inch offset hex wrench with a 1 1/8 to 2 5/8 inch capacity at about 1.5 pounds. Distributor descriptions say the hex jaw gives a multi-sided grip on hex nuts, square nuts, unions and valve packing nuts, and that the extra-wide opening suits sink and tub drain nuts.

It is a specialty wrench, not a round-pipe wrench. Its smooth hex jaws grip nuts and fittings without the bite of toothed pipe jaws, so use a straight pipe wrench when you are turning threaded pipe.

Spec sheet:

  • Length: 9 1/2 inches; capacity 1 1/8 to 2 5/8 inches (RIDGID).
  • Weight: about 1.5 pounds (RIDGID).
  • Jaws: thin, smooth hex design for nuts and unions (distributor descriptions).

What this means for you (general advice): A problem solver for drain nuts and unions where a straight wrench will not fit.

Fit and sizing: Offset head on a cast iron I-beam handle.

Versions to check: RIDGID also sells 4-packs of this wrench. Look for a single wrench, Model E-110.

Watch for: Not for gripping round pipe.

Skip it if: you need one wrench for threaded pipe.

Also Worth Knowing: Picks Without a Buy Button

These came up in research, but we could not match them to a clear listing from a US seller, or they sit outside the straight wrench list.

  • Milwaukee Cheater Steel Adaptable Pipe Wrench (48-22-7314): Bob Vila names it a top pick, with a 6.6 pound body, adaptable handle lengths, an overbite jaw and dual coil springs; the downside Bob Vila notes is the extra weight for overhead work. We did not find a clean listing from a US seller for the steel model, only compatible-part listings.
  • Milwaukee Cheater Aluminum Adaptable (48-22-7318): the listing we found was from a third-party seller, so we left it out of the buy list.
  • Strap wrenches: Bob Vila advises a strap wrench for pipes over 3 inches and for finished or plastic pipe where teeth would mark the surface.
  • Internal and chain wrenches: specialty tools for pipe that cannot be gripped from the outside; we did not rank them here.

Pipe Wrench Specs Compared

Figures come from the maker or source named in each section; some sheets disagree.

Specs compared
WrenchLengthCapacityMaterialWeightType
IRWIN 18 inch iron18 in2 1/2 inCast iron6.3 to 6.5 lbStraight
RIDGID Model 1010 in1 1/2 inDuctile iron1.75 lbStraight
RIDGID E-1109 1/2 in1 1/8 to 2 5/8 inCast iron1.5 lbOffset hex
Milwaukee 14 inch14 in2 inAluminum2.27 to 2.79 lbStraight
RIDGID 81414 in2 inAluminum2 1/4 to 2 1/2 lbStraight
RIDGID 81818 in2 1/2 inAluminum3 3/4 lbStraight
RIDGID 3103024 in3 inDuctile iron10 lbStraight
RIDGID 82424 in3 inAluminum6 lbStraight

Capacity is the maximum nominal pipe size the maker lists. Weights come from maker or distributor sheets and vary.

Our Pipe Wrench Evaluation Framework

We score each wrench on five questions using only what the named sources published.

  1. Capacity. Maximum nominal pipe size the wrench can grip.
  2. Weight. Matters most overhead and on long days.
  3. Material. Iron is tougher and cheaper; aluminum is lighter.
  4. Replaceable parts. Jaws and springs you can swap extend the life of the wrench.
  5. Recurring drawback. The limit sources raise most often.
How each product scores
WrenchCapacityWeightMaterialReplaceable partsMain drawback
RIDGID 8142 in2 1/4 to 2 1/2 lbAluminumYesCosts more than iron
RIDGID 8182 1/2 in3 3/4 lbAluminumYesCosts more than iron
RIDGID 8243 in6 lbAluminumYesHighest price
RIDGID 310303 in10 lbDuctile ironYesHeavy
Milwaukee 14 inch2 in2.27 to 2.79 lbAluminumNot statedWeights vary by sheet
RIDGID Model 101 1/2 in1.75 lbDuctile ironYesSmall capacity
IRWIN 18 inch iron2 1/2 in6.3 to 6.5 lbCast ironNot statedHeavy
RIDGID E-1102 5/8 in1.5 lbCast ironNot statedSpecialty use

Ratings are from manufacturer or distributor sheets; none were measured by us.

How to Choose a Pipe Wrench

  • Start with a 14 inch. PlumberMag calls a 14 inch aluminum straight wrench a good first purchase, with an 18 inch commonly used up to 2 1/2 inch pipe.
  • Match size to the pipe. RIDGID lists 10 inch at 1 1/2 inch capacity, 14 inch at 2 inch, 18 inch at 2 1/2 inch and 24 inch at 3 inch for its straight wrenches (RIDGID).
  • Pick material for the job. Aluminum cuts weight by roughly 40 percent per RIDGID and IRWIN; cast or ductile iron costs less and tolerates abuse better.
  • Check the jaws. Bob Vila says to look for hardened angled teeth, an overbite jaw and self-cleaning threads.
  • Leave a gap. PlumberMag says to keep about a half inch between the back of the hook jaw and the pipe.
  • Keep it clean. PlumberMag says to clean the teeth with a wire brush and oil the unpainted parts.

More reading: our plumber tools hub and all field service gear.

Where the Sources Disagree

Wrench weights. RIDGID’s US catalog lists the Model 814 at 2 1/2 pounds while a regional page lists 2 1/4, and Milwaukee 14 inch weights run from 2.27 to 2.79 pounds across distributors. Check the label on the wrench you receive.

Aluminum versus iron durability. Makers say aluminum offers the same durability as their iron lines; trade forum threads often say iron stands up better to cheater pipes and abuse. General advice: use aluminum for daily carrying and iron for the wrench you will lean on.

How long a wrench to carry. Bob Vila’s top pick adapts its handle length, while PlumberMag suggests starting with a 14 inch. General advice: two sizes, 14 and 18 inch, cover most service work.

Pipe capacity labels. Capacity is the maximum nominal diameter of steel pipe per RIDGID; practical grip on worn or painted pipe can be less.

Questions About Pipe Wrenches, Answered

“What size pipe wrench should I buy first?”

PlumberMag says a 14 inch aluminum straight wrench is a good first purchase. Add an 18 inch for larger pipe.

“Aluminum or cast iron?”

Aluminum is lighter, roughly 40 percent per RIDGID; iron costs less and takes more abuse.

“Which way does a pipe wrench turn?”

General advice: pull the handle toward the side where the hook jaw opens, so the wrench bites tighter as you pull. Backing off the wrench releases it.

“Why does my wrench slip?”

Dirty or worn teeth, a loose adjusting nut or too wide a gap. PlumberMag says to clean the teeth with a wire brush and keep about a half inch of gap behind the hook jaw.

“Can I use a pipe over the handle for more leverage?”

General advice: no, unless the wrench is built for it. Handles bend before they fail on ductile iron per PlumberMag, which is a warning. Milwaukee’s Cheater models use an adaptable handle for this reason.

“What do I use on pipes over 3 inches or finished pipe?”

Bob Vila advises a strap wrench for pipes over 3 inches and for pipe where teeth would mark the surface.

“Can I replace the jaws?”

RIDGID says its heavy-duty wrenches have replaceable twice-hardened jaws, and retailer pages say the aluminum hook jaw, heel jaw and spring are replaceable too.

“How do I care for a pipe wrench?”

Clean the teeth with a wire brush and oil the unpainted parts, per PlumberMag.

Mistakes to Avoid With Pipe Wrenches

  • Using one on nuts and fittings. Toothed jaws chew hex nuts; use a hex or adjustable wrench.
  • Pulling the wrong way. Pull toward the open side of the hook jaw.
  • Skipping the gap. Keep about a half inch behind the hook jaw, per PlumberMag.
  • Letting teeth clog. Brush them clean and oil the unpainted parts.
  • Over-extending the handle. Use a longer wrench instead.
  • Using it on chrome or plastic. Use a strap wrench, per Bob Vila.

How we checked this

  • Field Services HQ compared maker pages from RIDGID, Milwaukee and IRWIN with Bob Vila and PlumberMag guidance, plus common questions from trade forum threads.
  • Each figure names the source that published it, and where sources disagree we say so. Our own readings are labeled general advice.
  • Buy buttons go to US listings matched to each model, with stock and seller checked; as an Amazon Associate we earn from qualifying purchases. Price categories: Budget under $50, Mid-range $50 to $100, Premium above $100.

Pipe Wrench FAQ

What is the best pipe wrench overall?

For most plumbers, a 14 inch aluminum wrench such as the RIDGID Model 814 or the Milwaukee 14 inch.

What is the best budget pipe wrench?

The IRWIN 18 inch cast iron wrench and the RIDGID Model 10 are the low-cost iron options.

What size do I need for 2 inch pipe?

A 14 inch wrench is listed for 2 inch pipe; an 18 inch is for 2 1/2 inch.

Aluminum or iron?

Aluminum for daily carrying, iron for the wrench you lean on.

Can I replace the jaws?

Yes on RIDGID heavy-duty and aluminum models.

What is an offset pipe wrench for?

Reaching nuts and unions in tight spaces where a straight wrench will not fit.

When do I use a strap wrench?

On pipes over 3 inches and on finished or plastic pipe.

How do I keep a wrench gripping?

Keep the teeth clean and leave a half inch gap.

The Short Version

Best all-rounder: RIDGID Model 814 or Milwaukee 14 inch. Larger pipe: RIDGID Model 818. Biggest pipe: RIDGID 31030 (iron) or Model 824 (aluminum). Small fittings: RIDGID Model 10. Tight spaces: RIDGID E-110. Low cost 18 inch: IRWIN iron.

Sources

Author

  • Michael Carter

    I’m Michael Carter, a field service, ERP, and digital transformation expert with more than 13 years of experience helping service-based businesses improve their operations through better processes and technology.
    My experience covers the full spectrum of field service management, including technician scheduling, dispatching, work orders, preventive maintenance, asset management, inventory, service contracts, customer management, mobile workforce management, reporting, and operational automation. I also have extensive knowledge of ERP, CRM, and field service management platforms and how they can work together to create connected service operations.
    At Field Services HQ, I cover a wide range of topics related to field service and service business technology. This includes FSM software comparisons, ERP implementation, ERPNext, CRM integration, scheduling and dispatch solutions, maintenance management, technician productivity, AI in field service, automation, mobile applications, analytics, and emerging industry trends.
    I take a practical approach to technology. I look beyond features and focus on how a solution can actually solve operational problems, improve workflows, and deliver measurable value for a service business.
    Through my content, I aim to help business owners, field service managers, operations teams, and technicians understand the technologies and strategies that can make modern field service operations more efficient, connected, and scalable.

Scroll to Top